PQ Labs G6 4K Multi Touch Screen Overlay 65 inch
RECOMMENDED: Please use 3M VHB Tape (5952)for a more secure and permanent installation.
Introducing Q-Force Technology
Q-Force Technology senses the pressure you applied onto the display by adopting built-in force sensors around the screen. This enables pressure sensitivity for drawing & handwriting, and new possibilities with force sensitive UI interaction.
With FingerID technology, G6 recognizes presenter's identity, and loads custom content based on presenter's ID. With the technology advantage of FingerID, PQ Labs MagicBoard software detects the presenter standing beside the big screen, and loads his documents from cloud service with encrypted credentials.
4K Touch Fidelity Breakthrough
Raising the bar of the Ultimate Touch Experience
- Designed for 4K displays.
- Smooth & high-precision multi-touch control.
- Beautiful sketch & handwriting.
Detects 1.5mm Pen Tip
G6 series is able to detect pencil tips as passive pens.Capacitive Technology requires minimum 8mm in diameter.That's why the stylus are so thick and doesn't look like a pen.
- Use your finger for canvas manipulation and multi-touch.
- Use your pen for creating content & taking notes.
- Use eraser to modify content.
- Works for OneNote, PowerPoint, Photoshop, MS-Paint...
- * A Magnetic Eraser (sticks on metal frame) is shipped together with Active Pen.
* Pen+Touch SDK will be available later.
Active & Passive Stylus
Any stylus can be used as a passive pen
The Active Stylus pen (with built-in battery) is pressure sensitive providing an enhanced drawing and writing experience similar to standard pen and paper.
1 Year Limited Manufactuer Warranty
Posted by Unknown on 19th Oct 2017
The 64.63" model worked perfectly for the new Samsung Q9 QLED (65" diagonal x 1.0" depth 4K res screen) the screen is compatible with Samsung's "No-Gap" wall mount so the total thickness of screen and overlay was less than 1.5" which is only slightly thicker than the dry-erase board this replaced. (N.B. I did add a custom frame to support the overlay because the bezel on the Samsung is only 0.25")
The touch capabilities of the overlay works great for the users.
Posted by Jerry West on 2nd Jun 2017
I purchased a 4K 65" G6 for use with a Samsung QMF65 (4K screen). I have this fully installed and working on the wall now.
Everything works great and the touch is very responsive, primary users are completely non-computer literate 60 yr old male and female and they love it and find it easy to use (which says something about the intuitive touch capabilities of the screen).
Overall, I would definitely recommend the overlay. The touch capabilities are on par (if not better) than most of the other "integrated" touchscreen monitors I have.
Also, the solution I used with the PQ labs overlay and the Samsung QMF65 is exactly one HALF the cost of the cheapest "integrated" touchscreen 65" 4K monitor that I could find and that monitor was sub-par, no speakers, more than 2 inches thick, etc.
The only hitch I have (reason for only 4 stars instead of 5) was that the overlay I received is 1/2 an inch wider than the screen. this makes the 3M adhesive very visible through the touchscreen which is rather unprofessional, I am still trying to figure out how I am going to resolve that. This problem occurred even after I had specified to the sales person that I needed the overlay for the Samsung QMF65 model exactly and was told that this was the right overlay for that model of monitor.
Moral is, for future buyers, try and get someone to tell you the exact inside dimensions and check these on your monitor.